product description
The permanent magnet self-starting air-cooled impeller floating ball aerator is composed of 3-phase permanent magnet synchronous motor and gearbox, connecting rod, impeller, motor waterproof cover, floating ball and other main components. The motor and gearbox are connected with 3 hollow can After adding water, the floating ball is connected by a support rod and floats on the water surface. After being decelerated by the matching (2.2) kW motor, the large impeller with a cone angle of 110 degrees is driven to rotate. The rotating impeller stirs the water body, creates water splashes, and expands the contact surface between water and air. , At the same time, the harmful gas contained in the water escapes into the atmosphere, at the same time achieves the effect of increasing oxygen and improving water quality, and prevents the lack of oxygen such as fish.
Features
1. High-efficiency permanent magnet variable frequency speed regulation motor is used, which can save energy by more than 30 percent;
2. Motor control integrated design, simple and convenient installation;
Features
1. Lift water and stir. The impeller-type aerator can elevate the bottom water so that it alternates with the surface water, so as to increase oxygen to the bottom water, and the oxygenation depth exceeds 2 meters;
2. The mechanical structure is relatively simple, mechanical failures rarely occur during use, the maintenance is more convenient, and the maintenance cost is reduced;
3. In the process of use, it can form the middle and upper water flow, so that the dissolved oxygen in the middle and upper water body is uniform, which is suitable for pond cultivation and pond first aid equipment;
4. Expose harmful gases. The impeller aerator has a strong aeration function, and harmful gases such as ammonia, hydrogen sulfide, methane, carbon monoxide, etc. in the pool water can be effectively exposed.
Product parameters
model | Voltage | power | load surface | Oxygenation capacity | power efficiency | Energy saving ratio |
YLZ-900 | 220\/380V | 900W | 1-3 acres | greater than or equal to 1.2 | greater than or equal to 1.4 | 30 percent |
YLZ-1100 | 220\/380V | 1100W | 3-4 acres | greater than or equal to 1.6 | greater than or equal to 1.4 | 30 percent |
YLZ-1500 | 220\/380V | 1500W | 4-8 acres | greater than or equal to 2.3 | greater than or equal to 1.5 | 30 percent |
YLZ-3000 | 220\/380V | 3000W | 8-12 acres | greater than or equal to 4.5 | greater than or equal to 1.5 | 30 percent |
Instructions for use
The impeller-type aerator sucks up the oxygen-poor water at the lower part, and then pushes it out to four weeks, turning the stagnant water into living water. The water under the impeller-type aerator is strongly stirred by the blades and pipes, causing a hydraulic jump on the water surface and waves to form a water curtain that can envelop air. As the impeller rotates, a negative pressure is formed at the rear of the water stirring pipe, so that the air can be sucked into the water through the water stirring pipe, and immediately be stirred into micro-bubbles and enter the pressure zone of the impeller. Therefore, it is also beneficial to increase the dissolution rate of oxygen in the air and improve the efficiency of oxygenation.
Actual applicable effect
