product description
The waterwheel type aerator is composed of 3-phase permanent magnet synchronous motor and gearbox, frame, transmission shaft, three-angle bracket, coupling, pontoon, impeller, motor waterproof cover and other main components. The motor and gearbox pass through the machine The frame is fixed on the pontoon and floats on the water surface. After being decelerated by the matching motor, the impeller is driven to rotate, and the rotating impeller stirs the water body to create water splashes, expand the contact surface between water and air, and at the same time make the harmful gases contained in the water escape into the atmosphere. , At the same time achieve the effect of increasing oxygen and improving water quality, preventing hypoxia such as fish.
Features
1. Adopt high-efficiency 3-phase asynchronous air-cooled motor, saving energy by more than 30%, high temperature spray paint, corrosion resistance, maintenance-free;
2. High performance gearbox, high torque output;
3. Mechanical seals, first-class lubricating oil, low noise;
4. The complete pontoon, motor cover PE material with anti-aging agent, super nylon impeller, 304 stainless steel frame, shaft, fasteners;
5. High-efficiency motors that meet IE3 or IE4 standards can be customized according to customer needs;
Features
1. Using the water wheel aerator can keep the water in a flowing state and promote the uniformity of dissolved oxygen in the horizontal and vertical directions of the water body. It is especially suitable for eel breeding ponds. It can cause directional water flow and induce eels to eat on the food table.
2. Because its impeller speed is not high, it has little lifting force on the bottom layer, so it will not "arch the bottom of the pool", and it can increase oxygen in shallow pools with a water depth of about one meter.
3. The weight of the whole machine is also relatively light, and several more units can be installed on a larger water surface, and the water flow can be organized in one step.
4. The structure is relatively simple, the cost is low, and the oxygenation effect is good in shallow water ponds, and it is also suitable for ponds with deep dry silt.
5. The waterwheel type aerator has a strong push-flow ability and a certain mixing ability in the middle and upper layers, and can obtain a better oxygen-liquid contact area and high oxygenation efficiency.
Product parameters
model | Voltage | power | Application area | Oxygenation capacity | Number of impellers | Energy saving ratio | weight |
YCF-S-750 | 380V | 750W | 1-5 acres | greater than or equal to 1.1 | 2 | 35 percent | 60kg |
YCF-S-1100 | 380V | 1100W | 3-6 acres | greater than or equal to 1.3 | 2 | 35 percent | 60kg |
YCF-S-1500 | 380V | 1500W | 3-10 acres | greater than or equal to 1.5 | 4 | 35 percent | 70kg |
YCF-S-2200 | 380V | 2200W | 5-12 acres | greater than or equal to 2.2 | 6 | 35 percent | 75kg |
Instructions for use
When the paddle of the waterwheel type aerator is perpendicular to the water surface, a force parallel to the water surface is generated to form a directional water flow. When the paddle is about to leave the water surface, a negative pressure is formed on the back of the blade, which can move the lower layer Water lifting. When the blade leaves the water surface, it lifts the water in the blade bend and the water on the blade upwards, and is further thrown into the air under the action of centrifugal force, thereby arousing strong water splashes and water dew, and further driving a large amount of air into the air. Dissolution. The airflow formed by the rotation of the impeller can also accelerate the dissolution of air.
Actual applicable effect
